Southern California Club Xterra

Southern California Club Xterra => SCCX Display Case => Topic started by: Kjswa on January 23, 2016, 04:31:25 PM

Title: Good times on wheels
Post by: Kjswa on January 23, 2016, 04:31:25 PM

Username:  kjswa
Real Name: Kyle
Year:  2006
Make:  Nissan
Model: Xterra
Trim:  Off Road
Color:  Grey

Interior-
LED lights
Bungee cord ceiling net

Exterior-
Hefty aluminum skids
Hefty sliders
Hefty dual swing arm rear bumper
Rear diff cover
Brake & side marker LEDS
Rally armor mud flaps

Suspension-
PRG 2.0 Radflo with UCA in front
Deaver Leaf pack built to 900 lbs, PRG shackles, Bilstein 5100 from PRG.

Photos:
 [ You are not allowed to view attachments ]

 [ You are not allowed to view attachments ]

Made a point of seeing Pismo Beach on the road trip to get it home. Didn't plan on entering to dunes but as soon as I saw the OHV area that changed real quick.

 [ You are not allowed to view attachments ]

Got the bungee cord ceiling contraption installed. Hopefully it'll workout. Cost about $35 for the parts.

From the front back

 [ You are not allowed to view attachments ]

 [ You are not allowed to view attachments ]

 [ You are not allowed to view attachments ]

 [ You are not allowed to view attachments ]

 [ You are not allowed to view attachments ]

 [ You are not allowed to view attachments ]
Title: Re: Good times on wheels
Post by: RikRong on January 23, 2016, 04:53:16 PM
Nice looking truck. Just a heads up, an axe and shovel will fit under the rear seats. That's where I have mine.

Sent from my XT1575 using Tapatalk

Title: Re: Good times on wheels
Post by: GreenGoon on January 23, 2016, 05:07:07 PM
couldn't resist? Nice!  O0
Title: Re: Good times on wheels
Post by: Kjswa on February 05, 2016, 04:48:43 PM
Mounted a shovel on the rack using Yakima mighty mounts and quick fists

 [ You are not allowed to view attachments ]

Made use of an extra gun lock to make sure it doesn't go anywhere. Going to bedline the handle.
 [ You are not allowed to view attachments ]

 [ You are not allowed to view attachments ]
Title: Re: Good times on wheels
Post by: JFanaselle on February 05, 2016, 08:14:05 PM
Looks good. nice and secure, and doesn't stick up much at all.
Title: Re: Good times on wheels
Post by: Ghost65 on February 06, 2016, 08:49:31 AM
Nice build thread!  8) 8)
Title: Re: Good times on wheels
Post by: Kjswa on June 12, 2016, 02:16:53 PM
Sliders and bumper on. Had a little trouble with the bumper one. Of the nuts welded inside the frame broke free so I wasn't able to reinstall the forward left side bolt so I might have a shop run a small weld.
Title: Re: Good times on wheels
Post by: Celt on June 12, 2016, 03:25:19 PM
Them sliders are pretty shiney, might need to get out and get some trail modifications on them ASAP!


                                                                       8)

Title: Re: Good times on wheels
Post by: Kjswa on June 13, 2016, 11:12:42 AM
Quote from: Celt on June 12, 2016, 03:25:19 PM
Them sliders are pretty shiney, might need to get out and get some trail modifications on them ASAP!


                                                                       8)

Planning on it asap when I get home next month. Need to bolt up the skid plates to so they can all be modified together!
Title: Re: Good times on wheels
Post by: Kjswa on October 10, 2016, 07:47:12 PM
Finally grew a pair and took a hole saw to the fender. Couple hours and a entire tube of silicone later there was a snorkel. Replaced the brake lights with diode dynamics HP11 LED's. They throw out a ton of light and are easily visible in the day time. Then I crawled underneath it to wire brush and paint all the damage to sliders and frame from hungry valley. Won't be trying to follow a jeep with 37" tires again... Awning goes on this week and then I'm headed to Mojave.
Title: Re: Good times on wheels
Post by: GreenAcres on October 11, 2016, 04:46:12 AM
That's all coming along nicely (just viewed your bumper and slider pics). Really like the tire swing bumper; tire plus some gas cans, that's what I'll be looking for as well, when I get to that point :)
Title: Re: Good times on wheels
Post by: EJsarus on October 11, 2016, 08:30:21 AM
digging the dual swing rear bumper.
Title: Re: Good times on wheels
Post by: Kjswa on March 09, 2017, 12:56:38 PM
Installed a set of Deaver Springs (900lbs) and PRG shackles. Will be nice not dragging arse and bottoming out all day long. Going to order a set of Bilstein 5125 to fit. Then onto the list of damage to repair from Death Valley..

 [ You are not allowed to view attachments ]
Title: Re: Good times on wheels
Post by: JFanaselle on March 09, 2017, 03:24:19 PM
Nice!
Title: Re: Good times on wheels
Post by: Kjswa on May 16, 2017, 11:16:02 AM
It's not IKEA but it works.  8).

Went to Big Sur yesterday doing a little recon for a summer trip, first time off road on the new shocks & springs. It's unreal how much better it is. A lot more confidence is the rig now.
Title: Re: Good times on wheels
Post by: Jayrat on May 16, 2017, 08:36:49 PM
Nice Table Mod , good idea