Topic: Feeler: Titan Swap Party

[RikRong]

Congrats on pulling the trigger on the swap! I just finished mine... I also opted for the tundra strut. The one problem I had was that the springs that came on the tundra strut were WAY too stiff and stood my stock weight x on its tippy toes (uca's pinned to the coil bucket). So I opted to stick my stock springs on the tundra strut assembly (fits just fine), it still gave me about 3.5" of lift and a nice soft ride. Plus I got em on Amazon for $150 for the set so... What the hell might as well!!

In went with the shorter Tacoma springs. They're heavier than stock, shorter than the Tundra springs but a little softer. We'll see how it works. I also have price inquiries out for the custom top hats.

Sent from my XT1575 using Tapatalk

[Xrod]

In went with the shorter Tacoma springs. They're heavier than stock, shorter than the Tundra springs but a little softer. We'll see how it works. I also have price inquiries out for the custom top hats.

Sent from my XT1575 using Tapatalk

Good call that should work out pretty good

[beachcruiser]

Did i miss the party? I have radflo coils, prg uca, ubolt flip, AAL, and new shocks to put on and will definitely need some help and guidance from people who have done this before. I can bring lots of beer/drinks/pizza/burritos/etc.

[PainRoller]

Did i miss the party? I have radflo coils, prg uca, ubolt flip, AAL, and new shocks to put on and will definitely need some help and guidance from people who have done this before. I can bring lots of beer/drinks/pizza/burritos/etc.

Looks like a potential MOD day is in the planning stages on this thread: So I need help! What spot light do I shine in the sky?

[RikRong]

Did i miss the party? I have radflo coils, prg uca, ubolt flip, AAL, and new shocks to put on and will definitely need some help and guidance from people who have done this before. I can bring lots of beer/drinks/pizza/burritos/etc.

Didn't miss the party, I just decided to switch gears on this and keep it low key. Check out the link PR posted and you should be able to find some info.

Sent from my XT1575 using Tapatalk