Topic: Moving and have a bunch of parts to sell that might be useful.

[dan826]

Ok, so will be moving soon and clearing out the garage. I have a bunch of parts off an X and a Frontier that might be of interest to people here:

2 R180 diffs, barely used. These were replaced with m205s  a few years ago with less than 3k miles on them for a titan swap.
2 Stock Bilstein rear shocks off a pro4x X
2 Stock Bilstein rear shocks off a pro4x Frontier
2 Stock Belstein front shocks off a pro4x X
2 Stock Belstein front shocks off a pro4x Frontier
2 Radflow 2.0 Front shocks from a Frontier.
2 PRG UCAs off a Frontier.

The Radflo/UCA kit might be missing a few of the little washer/spacers where the bolts go through, but I'm sure those are easy
to get replacements for.

All these have very little wear/use.

Make me any reasonable offer for anything you want. Pickup only. I'm in Riverside.

[KickinTires]

Tell me more about the Radflo 2.0 inch shocks.  What are the coils rate for, 600lb?  How many miles on them roughly.  Mine need to be rebuilt and this may be easier in the long run.

[dan826]

Spring rate 650. I had them on for a few months and then replaced them when I decided to go for a titan swap. I'm guessing they have Max 2000 miles.

[KickinTires]

Thanks Dan for the feedback.  Mine are the same as yours except with about 100K miles.  They're toast, but can be rebuilt. So I decided to pull my Radflos off the truck and will send them in for a rebuild.  Running the OEM Pro-4X Bilsteins and I'm hoping the Radflos get done fast as the OEM jobs are crap.  Good luck with all the other items.

[SuperSlideStyle]

Interested in the PRG UCA's.  Info?

[dan826]

They are these: http://www.prgproducts.com/shop/product/spc-upper-arms/ Great shape, very little used. Switched them out for the titans after the titan swap after a couple months of use.