Welcome Guest!!

Welcome to SCCX, for full access to the forums, please register and join our community, it's free.

Author Topic: SoCalXTerry Build  (Read 81181 times)

Ghost65

  • Old-Schooler
  • Hero Member
  • *****
  • Location: East of You
  • Posts: 862
  • 4wd Pts: -476
    • 2019 Ready Mix Taco
Re: SoCalXTerry Build
« Reply #90 on: January 25, 2013, 02:39:14 AM »
Interesting on the coil overs.  Next time we see each other I am curious to find out what Glenn had to say on this topic.
KD6DCI

Once again, I must state for the record: We are not a club, we are enablers for your addiction.

SoCalXTerry

  • Hero Member
  • *****
  • Location: Northern Orange County
  • Posts: 1273
  • 4wd Pts: 54
Re: SoCalXTerry Build
« Reply #91 on: January 25, 2013, 09:31:18 PM »
Interesting on the coil overs.  Next time we see each other I am curious to find out what Glenn had to say on this topic.

I spoke to both Glenn and Mike about the coilovers and they said they were installed correctly.   Threaded end down for these particular Coilovers.
Terry

Greasy side down - K6XTL

SoCalXTerry

  • Hero Member
  • *****
  • Location: Northern Orange County
  • Posts: 1273
  • 4wd Pts: 54
Re: SoCalXTerry Build
« Reply #92 on: January 26, 2013, 09:42:12 AM »
Well a Saturday morning update of the travails of Terry:

This is a picture of what was left of my coilover:


Note:  The bent Shock body and the welded shock shaft.

KUDOS TO:  RADFLO for piecing together a bent broken Coilover( The complemented the welding job and admitted they had never seen anything quite like that)
                 Russ and Mike (The recovery crew from San Diego 4Wheelers) who got me out of a very tenuous situation (In a 20 foot wide waterfall can't go
                 forward, backward or turn around on my own) and performed the surgery on the coilover to get me home.

And this is a picture of the diff end of the passenger CV half shaft:


This is actually what it supposed to look like minus the popsicle stick:


NOTE:  The little popsicle looking thing is the end of the CV Shaft that was stuck in the axle.

KUDOS TO:  Once he stopped laughing  ;)  ;D My friend Toro his creativity, ingenuity and willingness to hang in there to the bitter end made all
                 this happen.  
                 And to Dan826 who offered up his R180 CV shafts.
 
I guess bottom line my X is operational again at least highway-wise.   I'm going to get out somewhere soon to make sure the 4 wheel drive and lockers work but we are really confident that every thing is back to whatever state of abnormalcy  :P that I represent.
 
Thanks again to everybody who helped get me through this ordeal.

 
« Last Edit: January 26, 2013, 12:05:30 PM by SoCalXTerry »
Terry

Greasy side down - K6XTL

Ghost65

  • Old-Schooler
  • Hero Member
  • *****
  • Location: East of You
  • Posts: 862
  • 4wd Pts: -476
    • 2019 Ready Mix Taco
Re: SoCalXTerry Build
« Reply #93 on: January 26, 2013, 04:48:04 PM »
Interesting note...looks like the half axles blow before a locked R180?
KD6DCI

Once again, I must state for the record: We are not a club, we are enablers for your addiction.

SoCalXTerry

  • Hero Member
  • *****
  • Location: Northern Orange County
  • Posts: 1273
  • 4wd Pts: 54
Re: SoCalXTerry Build
« Reply #94 on: January 26, 2013, 05:34:23 PM »
Interesting note...looks like the half axles blow before a locked R180?

Great observation John.
Terry

Greasy side down - K6XTL

Toro

  • Hero Member
  • *****
  • Posts: 2066
  • 4wd Pts: 126
  • yep, Dos XX and Chipotle
Re: SoCalXTerry Build
« Reply #95 on: January 26, 2013, 07:08:06 PM »
This was what I had hoped for. A failure would occur at the cheapest and easiest to replace part of the front end. As long as your not a throttle jockey, the locked R180 is pretty stout.

Toro

  • Hero Member
  • *****
  • Posts: 2066
  • 4wd Pts: 126
  • yep, Dos XX and Chipotle
Re: SoCalXTerry Build
« Reply #96 on: January 26, 2013, 10:32:06 PM »
Here's my poser shot with the culprit
http://i1082.photobucket.com/albums/j361/Sprinter7/AA9FE72A-54FF-4C04-BB72-C6855E38270A-7456-00000725855C7415.jpg
SoCalXTerry Build

Back on the ground and ready to take names
http://i1082.photobucket.com/albums/j361/Sprinter7/5441AA0F-4EB9-4E83-A460-1546D718FD3C-7456-0000072586717F16.jpg
SoCalXTerry Build

SoCalXTerry

  • Hero Member
  • *****
  • Location: Northern Orange County
  • Posts: 1273
  • 4wd Pts: 54
Re: SoCalXTerry Build
« Reply #97 on: January 27, 2013, 05:14:27 AM »
I can't say what emotions came out when that little popsicle saw the light of day either.   That was some scary work too.   Thanks Danny..  You da man!!!!!
Terry

Greasy side down - K6XTL

Toro

  • Hero Member
  • *****
  • Posts: 2066
  • 4wd Pts: 126
  • yep, Dos XX and Chipotle
Re: SoCalXTerry Build
« Reply #98 on: January 27, 2013, 04:50:55 PM »
I'd say the front diff is unscathed.
http://i1082.photobucket.com/albums/j361/Sprinter7/496738FC-FF96-421E-BF00-1F537A750469-7456-000007E8611B022C.jpg
SoCalXTerry Build

http://i1082.photobucket.com/albums/j361/Sprinter7/33D904C5-387F-4858-A97C-B1AE9F49F680-7456-000007E88235E46D.jpg
SoCalXTerry Build


chrishaynesusa

  • thenewx
  • Hero Member
  • *
  • Location: San Jose CA
  • Posts: 545
  • 4wd Pts: -35
Re: SoCalXTerry Build
« Reply #99 on: January 27, 2013, 07:04:23 PM »
That rad skid has taken some high hits :)

SoCalXTerry

  • Hero Member
  • *****
  • Location: Northern Orange County
  • Posts: 1273
  • 4wd Pts: 54
Re: SoCalXTerry Build
« Reply #100 on: January 27, 2013, 07:56:14 PM »
That rad skid has taken some high hits :)

Bumper too actually..   That's from a lot of abuse I'm afraid
« Last Edit: January 27, 2013, 07:57:59 PM by SoCalXTerry »
Terry

Greasy side down - K6XTL

npgtech

  • Sr. Member
  • ****
  • Location: Honolulu, HI
  • Posts: 406
  • 4wd Pts: 25
    • 2010 Xterra / 2015 Frontier
Re: SoCalXTerry Build
« Reply #101 on: January 27, 2013, 09:09:47 PM »
That rad skid has taken some high hits :)

Hey Chris, you think it needs a hit of some Hot Purple??

RockinX

  • Sr. Member
  • ****
  • Posts: 419
  • 4wd Pts: 33
Re: SoCalXTerry Build
« Reply #102 on: January 27, 2013, 10:12:05 PM »
Wow!  :o  Looks great!  You guys make a great team with the breaking and fixing. 

Ghost65

  • Old-Schooler
  • Hero Member
  • *****
  • Location: East of You
  • Posts: 862
  • 4wd Pts: -476
    • 2019 Ready Mix Taco
Re: SoCalXTerry Build
« Reply #103 on: January 27, 2013, 10:23:11 PM »
Hey Chris, you think it needs a hit of some Hot Purple??

Did somebody say purple?

http://i971.photobucket.com/albums/ae195/DzrtX/F3083ED8-1CFB-4888-96CC-AAEAE553A2F0-328-000000230F66545E.jpg
SoCalXTerry Build
KD6DCI

Once again, I must state for the record: We are not a club, we are enablers for your addiction.

Ghost65

  • Old-Schooler
  • Hero Member
  • *****
  • Location: East of You
  • Posts: 862
  • 4wd Pts: -476
    • 2019 Ready Mix Taco
Re: SoCalXTerry Build
« Reply #104 on: January 27, 2013, 10:25:01 PM »
I can't say what emotions came out when that little popsicle saw the light of day either.

Taken out of context, this line sure could.... ;D ;D ;D
KD6DCI

Once again, I must state for the record: We are not a club, we are enablers for your addiction.

 


Powered by EzPortal