Welcome Guest!!

Welcome to SCCX, for full access to the forums, please register and join our community, it's free.

« previous next »
Pages: [1]

Author Topic: anyone rocking SPC UCA?  (Read 6182 times)

3rdhandedX

  • Jr. Member
  • **
  • Posts: 25
  • 4wd Pts: 2
    • 05 X
anyone rocking SPC UCA?
« on: February 14, 2015, 02:02:01 PM »
I have strut spacers and rest are stock. my question is can I just install titan UCA and do an alignment?  

or if I do choose on titan uca..I have to use uca and lca together order to work ..

I just want to mininize / have some more clearance on top of coil bucket cheapest possible

2nd questio .. for those with SPC UCA

how does alignment holding up on you guys?  I don't do heavy wheeling . does the alignment nut moves around on you guys?  I'm thinking about getting these over rough country uca


« Last Edit: February 16, 2015, 04:09:15 PM by 3rdhandedX »
Logged

knightrider

  • Administrator
  • Hero Member
  • *****
  • Location: San Diego, CA
  • Posts: 2527
  • 4wd Pts: 228
    • 2016 Pro4x
Re:
« Reply #1 on: February 14, 2015, 02:29:19 PM »
You can't mix titan UCA with Xterra LCA.
Titan UCA has to be used with titan LCA.  Stock titan UCA still suffer from coil bucket contact.
Logged
Jordan - K6XTE
2012 Knight Armor Xterra Pro-4X - Sold :(
2016 GunMetal Frontier Pro-4X with AT Summit

3rdhandedX

  • Jr. Member
  • **
  • Posts: 25
  • 4wd Pts: 2
    • 05 X
Re: can this work?
« Reply #2 on: February 14, 2015, 03:31:12 PM »
I see. thank you
Logged

Motorpig77

  • Sr. Member
  • ****
  • Posts: 289
  • 4wd Pts: 31
Re: anyone rocking SPC UCA?
« Reply #3 on: February 19, 2015, 12:41:58 AM »
I ran the SPC UCA's before I swapped and had no alignment issues.  They Nut stayed in place without an issue.  The only issue I had with the SPC's was the ball joints...but that was my own fault! The boots tear easily! :)
Logged

knightrider

  • Administrator
  • Hero Member
  • *****
  • Location: San Diego, CA
  • Posts: 2527
  • 4wd Pts: 228
    • 2016 Pro4x
Re:
« Reply #4 on: February 19, 2015, 09:17:58 AM »
I think the boot issue is poor design on spc's part.  To align the truck properly the ball joint has to be pushed all the way in and this makes it contact the coilbucket, ripping the boot.  I think everyone that has run spc has figured this out at some point and had to grind down the lip on the coilbucket to stop ripping the boot.
Logged
Jordan - K6XTE
2012 Knight Armor Xterra Pro-4X - Sold :(
2016 GunMetal Frontier Pro-4X with AT Summit

steve c

  • Hero Member
  • *****
  • Location: Placentia
  • Posts: 1303
  • 4wd Pts: -1577
    • 2012 Pro4Steve
Re:
« Reply #5 on: February 19, 2015, 11:06:57 AM »
Quote from: knightrider on February 19, 2015, 09:17:58 AM
I think the boot issue is poor design on spc's part.  To align the truck properly the ball joint has to be pushed all the way in and this makes it contact the coilbucket, ripping the boot.  I think everyone that has run spc has figured this out at some point and had to grind down the lip on the coilbucket to stop ripping the boot.

Or where clueless, but fortunate enough to have people who knew better from the start!

http://imagizer.imageshack.us/v2/800x600q90/18/op72.jpg
anyone rocking SPC UCA?
Logged
Steve - KK6OFL

ERMAHGERD CLICK ME  <--- (Build Thread Linky)

3rdhandedX

  • Jr. Member
  • **
  • Posts: 25
  • 4wd Pts: 2
    • 05 X
Re: anyone rocking SPC UCA?
« Reply #6 on: February 20, 2015, 07:42:40 PM »
I will definitely grind some rubbing area down . thanks for this info ! 
Logged

Ghost65

  • Old-Schooler
  • Hero Member
  • *****
  • Location: East of You
  • Posts: 862
  • 4wd Pts: -476
    • 2019 Ready Mix Taco
Re: anyone rocking SPC UCA?
« Reply #7 on: February 21, 2015, 12:13:19 PM »
Quote from: steve c on February 19, 2015, 11:06:57 AM
Or where clueless, but fortunate enough to have people who knew better from the start!

http://imagizer.imageshack.us/v2/800x600q90/18/op72.jpg
anyone rocking SPC UCA?


The shirt says it all.


Sent from Planet Claire
 using Tapatalk
Logged
KD6DCI

Quote from: RBduffer on August 14, 2014, 04:14:18 PM
Once again, I must state for the record: We are not a club, we are enablers for your addiction.

Duke562(rmaligie)

  • Jr. Member
  • **
  • Location: Oceanside, CA
  • Posts: 94
  • 4wd Pts: 5
Re: anyone rocking SPC UCA?
« Reply #8 on: February 21, 2015, 08:08:37 PM »
John, I just put those on my 4runner so far no issues


Sent from my iPhone using Tapatalk
Logged
Pages: [1]
« previous next »
 


Powered by EzPortal