Welcome Guest!!

Welcome to SCCX, for full access to the forums, please register and join our community, it's free.

« previous next »
Pages: 1 ... 4 5 [6] 7

Author Topic: Pepe, the Little Mule  (Read 62496 times)

Jayrat

  • Hero Member
  • *****
  • Location: SAN DIEGO / WPG
  • Posts: 1617
  • 4wd Pts: -667
  • FLBLFY
    • 2013 X
Re: Pepe, the Little Mule
« Reply #75 on: July 18, 2016, 08:31:52 PM »
These people mess with your brain  :o
so many good suggestions
Logged
You can pick your nose & you can pick your friends,   But you can't wipe your friends under the couch

Celt

  • Hero Member
  • *****
  • Location: In the basket of Deplorables. FJB Edition.
  • Posts: 3538
  • 4wd Pts: -20000
  • What this World Needs Is A Few More Rednecks.
Re: Pepe, the Little Mule
« Reply #76 on: July 18, 2016, 08:39:48 PM »
Quote from: PainRoller on July 18, 2016, 02:47:41 PM
Thanks! FiG installed the ARB this weekend.  Love the awesome pic of your rig after camping!  :D

We def did NOT run this heavy a gauge....  :(

I'm aware of your delight in spending our money!! LOL  Hopefully, I can reciprocate!  >:D

And I really don't want an extra battery in the back, if that can be avoided.....
 
We didn't think we needed an extra battery, either.  Figured we'd keep the vehicle running to air up the tires, and the alternator should handle the load.  How BAD is it if we ran the wrong gauge?

You guys are KILLING ME!!!   :'( :'(   

Already pulled wire and installed ARB OBA (pic to follow)......

Obviously I'm thick headed.....  I don't understand why an extra battery in the back would allow us to run smaller cable...wouldn't it need to be the same gauge? 

And crapola, guys...... I think we ran too small a gauge...... ARB required 10awg, we ran 8awg (2 red, one black).  Obviously we didn't accurately account for distance as we didn't run the formula.... :'(

I looked up the formula and basically we need to run 2awg for each wire?!?!  The 8awg barely fit along the path we ran, how the hell are we supposed to get 3- 2awg wires to fit?!?!?!  :o  :o

Also, just because I'm having a gauge crisis, don't think for a second I don't super appreciate all your input.  'Cuz I do....




First questions first, is your Flux Capacitor set within spec for your year vehicle?
Logged
Isaiah 6:8

RBduffer

  • BOD
  • Hero Member
  • ******
  • Location: Fallbrook of course
  • Posts: 1883
  • 4wd Pts: 135
    • '07 OR Xterra
Re: Pepe, the Little Mule
« Reply #77 on: July 18, 2016, 10:26:48 PM »
Mike, gimme a call.  Your not that far off.
Duffman
Logged
Of all the things I've lost...
I miss my mind the most

KJ6YPO

PainRoller

  • Hero Member
  • *****
  • Posts: 672
  • 4wd Pts: 46
  • DILLIGAF
    • 2009 Bad Ass Xterra - Rig Name: PEPE
Re: Pepe, the Little Mule
« Reply #78 on: July 18, 2016, 11:20:33 PM »
Quote from: RBduffer on July 18, 2016, 10:26:48 PM
Mike, gimme a call.  Your not that far off.
Duffman

Mike?  Who's Mike?!?  Just kidding....I'll relay yer message to the aforementioned human..... (betcha didn't know I knew such a big word, now did ya?) O0
Logged

knightrider

  • Administrator
  • Hero Member
  • *****
  • Location: San Diego, CA
  • Posts: 2527
  • 4wd Pts: 228
    • 2016 Pro4x
Re: Pepe, the Little Mule
« Reply #79 on: July 19, 2016, 12:19:48 AM »
You would only need one 2ga cable run to the back, and it's probably easiest to run that wire along the underside of the vehicle.  A ground can be run along side the positive as well, but a short ground to the body works just as well.  Remember to still account for the length of the ground cable when calculating for voltage drop even if your grounding to the body.(just double the length of the positive cable)

8ga for a 30a compressor in the back of the vehicle is OK, not great but it will work, just not as well.  The single ground for 2 positive leads is a big no-no, each positive needs it's own ground of equal size to the positive

Sent from my RTT while stargazing

Logged
Jordan - K6XTE
2012 Knight Armor Xterra Pro-4X - Sold :(
2016 GunMetal Frontier Pro-4X with AT Summit

PainRoller

  • Hero Member
  • *****
  • Posts: 672
  • 4wd Pts: 46
  • DILLIGAF
    • 2009 Bad Ass Xterra - Rig Name: PEPE
Re: Pepe, the Little Mule
« Reply #80 on: July 25, 2016, 09:55:46 AM »
Quote from: knightrider on July 19, 2016, 12:19:48 AM
You would only need one 2ga cable run to the back, and it's probably easiest to run that wire along the underside of the vehicle.  A ground can be run along side the positive as well, but a short ground to the body works just as well.  Remember to still account for the length of the ground cable when calculating for voltage drop even if your grounding to the body.(just double the length of the positive cable)

8ga for a 30a compressor in the back of the vehicle is OK, not great but it will work, just not as well.  The single ground for 2 positive leads is a big no-no, each positive needs it's own ground of equal size to the positive

Sent from my RTT while stargazing

Thank you knightrider and Duffman for ALL the help :D 

We appreciate er'body's input to make sure Pepe doesn't blow up on the trails!!  O0

We took the following advice:
1. Ran a 2nd ground in parallel (2 red, 2 black - 8ga each)
2. Ran compressor for over 15 mins in 108 degree weather
3. Checked wires for heat

No extra heat, no compressor failures!   We.Are.Good.To.Go!

So now..... PICS!!

FiG hard at work.
 [ You are not allowed to view attachments ]

Wire path:
 [ You are not allowed to view attachments ]

Compressor placement:
 [ You are not allowed to view attachments ]

ARB switch:
 [ You are not allowed to view attachments ]

Front and Rear Chucks:
 [ You are not allowed to view attachments ]

 [ You are not allowed to view attachments ]

Still using Frankenstein tank:
 [ You are not allowed to view attachments ]




Logged

Jayrat

  • Hero Member
  • *****
  • Location: SAN DIEGO / WPG
  • Posts: 1617
  • 4wd Pts: -667
  • FLBLFY
    • 2013 X
Re: Pepe, the Little Mule
« Reply #81 on: July 25, 2016, 10:10:55 AM »
Very nice,  Pepe is looking good ,I need to get my @$$ in gear and do OBA
Logged
You can pick your nose & you can pick your friends,   But you can't wipe your friends under the couch

PainRoller

  • Hero Member
  • *****
  • Posts: 672
  • 4wd Pts: 46
  • DILLIGAF
    • 2009 Bad Ass Xterra - Rig Name: PEPE
Re: Pepe, the Little Mule
« Reply #82 on: July 25, 2016, 10:48:03 AM »
Quote from: Jayrat on July 25, 2016, 10:10:55 AM
Very nice,  Pepe is looking good ,I need to get my @$$ in gear and do OBA

WORTH IT!  8)

Now that it's done, I wish we had tackled this project sooner.  Feel so much more prepared for getting OR solo or in a group....
Logged

occupantX

  • Full Member
  • ***
  • Location: 92127
  • Posts: 188
  • 4wd Pts: 65535
Re: Pepe, the Little Mule
« Reply #83 on: July 25, 2016, 09:36:35 PM »
Wow, this looks good....
Logged
The non-club non-member formerly known as sdcaKLR, 'cause you know..bananas

RBduffer

  • BOD
  • Hero Member
  • ******
  • Location: Fallbrook of course
  • Posts: 1883
  • 4wd Pts: 135
    • '07 OR Xterra
Re: Pepe, the Little Mule
« Reply #84 on: July 26, 2016, 08:55:16 AM »
Now I know what to do if/WHEN mine blows up :o

Nice job!
Logged
Of all the things I've lost...
I miss my mind the most

KJ6YPO

PainRoller

  • Hero Member
  • *****
  • Posts: 672
  • 4wd Pts: 46
  • DILLIGAF
    • 2009 Bad Ass Xterra - Rig Name: PEPE
Re: Pepe, the Little Mule
« Reply #85 on: January 30, 2018, 05:35:24 PM »
It's been awhile since I've posted in the Display Case, and altho this isn't an upgrade, I believe maintenance to be just as important (so there).

Today's project: Assess, clean, and repaint skid plates.....

Pre- pictures (after removing 2 inches of Soda Lake Mud/Salt):

 [ You are not allowed to view attachments ]

I dubbed this one "Ol' Rusty"

 [ You are not allowed to view attachments ]


Used this product (1 Primer, 4 Black Paint):

 [ You are not allowed to view attachments ]

I only primed the really bad spots and all of Ol' Rusty.  This paint is supposed to be good for up to 2000 degrees (no open flame), peel resistant, rust inhibitor, and Gas and Oil Resistant (The gas skid plate had some bad peeling and rust due to gas overflow and pluggage [that's a word right?!?!]).  Paint went on really nice, except the last can, it was an a-hole..... 

Final product - still wet but SO PRETTY!!!

 [ You are not allowed to view attachments ]

 [ You are not allowed to view attachments ]

« Last Edit: January 30, 2018, 05:38:15 PM by PainRoller »
Logged

RBduffer

  • BOD
  • Hero Member
  • ******
  • Location: Fallbrook of course
  • Posts: 1883
  • 4wd Pts: 135
    • '07 OR Xterra
Re: Pepe, the Little Mule
« Reply #86 on: January 30, 2018, 08:56:58 PM »
You guys clean your skid plates more than I clean my rear window :-\
Well done.
Logged
Of all the things I've lost...
I miss my mind the most

KJ6YPO

Jayrat

  • Hero Member
  • *****
  • Location: SAN DIEGO / WPG
  • Posts: 1617
  • 4wd Pts: -667
  • FLBLFY
    • 2013 X
Re: Pepe, the Little Mule
« Reply #87 on: January 30, 2018, 08:57:57 PM »
WOW ,that's scary
I really need to get under Lucy.

Looks good Guys
Logged
You can pick your nose & you can pick your friends,   But you can't wipe your friends under the couch

steve c

  • Hero Member
  • *****
  • Location: Placentia
  • Posts: 1303
  • 4wd Pts: -1577
    • 2012 Pro4Steve
Re: Pepe, the Little Mule
« Reply #88 on: January 30, 2018, 09:47:10 PM »
I'm scared to take mine off!

Plus, it's a huge PITA.  Out of sight, out of mind?!?!?!  (I should really take them off, lol)
Logged
Steve - KK6OFL

ERMAHGERD CLICK ME  <--- (Build Thread Linky)

Celt

  • Hero Member
  • *****
  • Location: In the basket of Deplorables. FJB Edition.
  • Posts: 3538
  • 4wd Pts: -20000
  • What this World Needs Is A Few More Rednecks.
Re: Pepe, the Little Mule
« Reply #89 on: January 31, 2018, 05:44:33 AM »
Quote from: steve c on January 30, 2018, 09:47:10 PM
I'm scared to take mine off!

Plus, it's a huge PITA.  Out of sight, out of mind?!?!?!  (I should really take them off, lol)

  If I took mine off I would probably need Thor's hammer and at least 4 or 5 guys our size to pound them back into shape so I could hopefully get them back on.
Logged
Isaiah 6:8
Pages: 1 ... 4 5 [6] 7
« previous next »
 


Powered by EzPortal