Welcome Guest!!

Welcome to SCCX, for full access to the forums, please register and join our community, it's free.

Author Topic: Made a Run for the Border (Junk Yards)  (Read 6405 times)

JeffBett

  • Sr. Member
  • ****
  • Location: San Diego
  • Posts: 344
  • 4wd Pts: 26
    • 06 Xterra
Made a Run for the Border (Junk Yards)
« on: August 08, 2016, 11:40:06 AM »
Saturday, a friend and I spent a few hours in the junk yards for misc. parts he needed for the 05 X he just bought.  We checked out ~20 Xterras and a few Frontiers.  Most had plenty of parts left and most body panels.  His has a dent in a door and he was interested in just buying a replacement but we did not find any Yellow ones.  Its an interesting challenge finding the Xterras as there are dozens of smaller yards.  You have to ask at each one you find where else there may be some.  We managed to find most all the things we needed including rear cup holders and the smaller front cup holder inserts.  We managed to find some things we did not know we needed as well.  I grabbed an extra tool to lower the spare tire so I can keep it handier.  Since the last time I was there about 5 months ago, there are several new wrecks.  If you are looking for something in particular, let me know, I may remember if I saw it and where it was.  I did find 3 hitches, only one was complete with wiring.

EJsarus

  • Hero Member
  • *****
  • Location: Whittier,Ca
  • Posts: 607
  • 4wd Pts: 52
    • 5th gen T4R
Re: Made a Run for the Border (Junk Yards)
« Reply #1 on: August 08, 2016, 11:48:37 AM »
looking for the headlight switch with fog light option off a 06-07 xterra. im sure the same year frontier will work fine. Also any of them 4x4?

JeffBett

  • Sr. Member
  • ****
  • Location: San Diego
  • Posts: 344
  • 4wd Pts: 26
    • 06 Xterra
Re: Made a Run for the Border (Junk Yards)
« Reply #2 on: August 08, 2016, 12:00:27 PM »
I remember 2 of them being 4x4.  Almost all of them had the engines and drive train removed. but I did see the transfer case sitting in the back of one of them, and another I noticed the 4x4 dash knobs and switches.  I know there was one with fog lamps but I did not notice if the switch was there.

JFanaselle

  • BOD
  • Hero Member
  • ******
  • Location: Murrieta, CA
  • Posts: 2351
  • 4wd Pts: 12000
    • 2010 Xterra S 4x4
Re: Made a Run for the Border (Junk Yards)
« Reply #3 on: August 08, 2016, 12:13:32 PM »
any 3.69 ratio M226 rear axles?  ::)

knightrider

  • Administrator
  • Hero Member
  • *****
  • Location: San Diego, CA
  • Posts: 2527
  • 4wd Pts: 228
    • 2016 Pro4x
Re: Made a Run for the Border (Junk Yards)
« Reply #4 on: August 08, 2016, 01:43:32 PM »
looking for the headlight switch with fog light option off a 06-07 xterra. im sure the same year frontier will work fine. Also any of them 4x4?

Just an FYI, some other nissan models use the same turn signal stalk.  I got one for SteveC from a sentra.
Jordan - K6XTE
2012 Knight Armor Xterra Pro-4X - Sold :(
2016 GunMetal Frontier Pro-4X with AT Summit

EJsarus

  • Hero Member
  • *****
  • Location: Whittier,Ca
  • Posts: 607
  • 4wd Pts: 52
    • 5th gen T4R
Re: Made a Run for the Border (Junk Yards)
« Reply #5 on: August 08, 2016, 02:38:51 PM »
I remember 2 of them being 4x4.  Almost all of them had the engines and drive train removed. but I did see the transfer case sitting in the back of one of them, and another I noticed the 4x4 dash knobs and switches.  I know there was one with fog lamps but I did not notice if the switch was there.
Definitely interested in a few parts. I will PM you


Just an FYI, some other nissan models use the same turn signal stalk.  I got one for SteveC from a sentra.

Cool, would you know a part number or a list of other nissan im able to pull the stalk from?

JeffBett

  • Sr. Member
  • ****
  • Location: San Diego
  • Posts: 344
  • 4wd Pts: 26
    • 06 Xterra
Re: Made a Run for the Border (Junk Yards)
« Reply #6 on: August 08, 2016, 03:06:04 PM »
I am pretty sure neither of the two 4x4 models were Off road/pro4X so probably no on the 3.69 axle.

If anyone goes to the Junk Yards in the LA area and finds a 2nd Gen yellow with the passenger read door intact, please let me know.  I don't even know where they are up there?

knightrider

  • Administrator
  • Hero Member
  • *****
  • Location: San Diego, CA
  • Posts: 2527
  • 4wd Pts: 228
    • 2016 Pro4x
Re: Made a Run for the Border (Junk Yards)
« Reply #7 on: August 08, 2016, 04:09:57 PM »
Pretty much any Xterra/pathfinder/frontier/sentra 07 on will work
Jordan - K6XTE
2012 Knight Armor Xterra Pro-4X - Sold :(
2016 GunMetal Frontier Pro-4X with AT Summit

RikRong

  • Administrator
  • Hero Member
  • *****
  • Location: Freedom Country
  • Posts: 1429
  • 4wd Pts: 71
    • 2015 Pro4X Xterra
Re: Made a Run for the Border (Junk Yards)
« Reply #8 on: August 08, 2016, 05:42:58 PM »
If you find an X that has the overhead console with the Bluetooth mic, I could use the cover panel. Let me know if you find something and I'll send PayPal your way.

Sent from my XT1575 using Tapatalk

R. Long
2015 Metallic Blue P4X-->Clicky

Ghost65

  • Old-Schooler
  • Hero Member
  • *****
  • Location: East of You
  • Posts: 862
  • 4wd Pts: -476
    • 2019 Ready Mix Taco
Re: Made a Run for the Border (Junk Yards)
« Reply #9 on: August 09, 2016, 09:14:04 AM »
Great thread...thanks for posting JB!

Ps...LMK if you see any wrecked 1st gen tacos while you're out there.


Sent from Cygnus-X1
KD6DCI

Once again, I must state for the record: We are not a club, we are enablers for your addiction.

JeffBett

  • Sr. Member
  • ****
  • Location: San Diego
  • Posts: 344
  • 4wd Pts: 26
    • 06 Xterra
Re: Made a Run for the Border (Junk Yards)
« Reply #10 on: August 19, 2016, 10:21:47 AM »
So I think I decided to make another run for the border tomorrow to pick up a couple more items for my son's X.  Anyone want me to grab something that is easy and if so, what is your max $

Anyone know if it is simple to change the map light from the lights only to the bigger one with the sunglasses holder.  Looks like it might just be cutting the 2 cross members that make the hole smaller and cutting the headliner?
« Last Edit: August 19, 2016, 01:19:20 PM by JeffBett »

JFanaselle

  • BOD
  • Hero Member
  • ******
  • Location: Murrieta, CA
  • Posts: 2351
  • 4wd Pts: 12000
    • 2010 Xterra S 4x4
Re: Made a Run for the Border (Junk Yards)
« Reply #11 on: August 19, 2016, 01:12:22 PM »
Yup, it's that simple. If you remove the headliner, you don't even have to cut the cross member that holds the existing light (you can just unbolt it). If you don't want to drop the liner, you can cut it easily with tin snips, but it'll always be sharp if you ever have to reach your hand up into the headliner for anything (ask me how I know!).

RBduffer

  • BOD
  • Hero Member
  • ******
  • Location: Fallbrook of course
  • Posts: 1883
  • 4wd Pts: 135
    • '07 OR Xterra
Re: Made a Run for the Border (Junk Yards)
« Reply #12 on: August 20, 2016, 03:46:52 PM »
Great thread...thanks for posting JB!

Ps...LMK if you see any wrecked 1st gen tacos while you're out there.
Sent from Cygnus-X1

I thought that you already owned one of those >:D
Of all the things I've lost...
I miss my mind the most

KJ6YPO

JeffBett

  • Sr. Member
  • ****
  • Location: San Diego
  • Posts: 344
  • 4wd Pts: 26
    • 06 Xterra
Re: Made a Run for the Border (Junk Yards)
« Reply #13 on: August 21, 2016, 06:16:47 PM »
Dave's #1 yard has probably a dozen of those Tacomas. They specialize in trucks of all flavors.

Ghost65

  • Old-Schooler
  • Hero Member
  • *****
  • Location: East of You
  • Posts: 862
  • 4wd Pts: -476
    • 2019 Ready Mix Taco
Re: Made a Run for the Border (Junk Yards)
« Reply #14 on: August 22, 2016, 02:56:56 PM »
Dave's #1 yard has probably a dozen of those Tacomas. They specialize in trucks of all flavors.

Thx Jeff


Sent from Cygnus-X1
KD6DCI

Once again, I must state for the record: We are not a club, we are enablers for your addiction.

 


Powered by EzPortal