I'm trying to think of ways to mount a Garmin GPSMap 64st where I can see it while driving.
On my old Xterra I had a similar device (60CSx) mounted in a Garmin-brand mount to a Garmin-brand quick release mounting assembly thingy that was stuck with permanent adhesive to the flat little tray that is in the dash on top of the radio. That worked well, except that I could not get the thing unstuck from the dash when I traded it in. Also, even if I could find that part, the the little tray area is not flat but pebble surfaced on my new 2014 X.
RAM makes a 2.5" round plate that had lots of screw holes in it that I could probably bolt the tray, but I don't know what the underside of the tray is like, and if it's flat so that I use washers or something to spread out the load across the plastic. Does anyone know what's under there, or how easy it is to get that tray out and put back without buggering up the front of the dash? I don't see any other flat spots on the front or top of the dash to bolt the 2.5" round plate to, and I don't want to take the dash apart anyway. The whole assembly will be too heavy to just use screws into the plastic. It may work on-road, but once things start bumping and bouncing it will come loose.
Another idea I had was to find a RAM clamp of some sort that would attach to the driver's side grab handle. That means having the power cable running across the top of the steering wheel, which is okay; but is also means that the spoken feature of turn-by-turn directions won't work, since Heather won't be able to see the device from that distance.
I would like to have it somewhere close to where the antenna can "see" out the windshield.
Any ideas would be appreciated. Also, any comments or thoughts on how well RAM mounts work, as I am leaning in the direction finding some sort of solution from them.
Thanks in advance.